Case for Falcon 16v3

[AJ240]

Thought I would show you what just came off my printer.
Suitable only for the Falcon 16v3 controller.

 

[burnt]

nice looking case

 

[Heath-LightsOnTapley]

would you be able to share the stl? cheers

 

[AJ240]

would you be able to share the stl? cheers

I just put this on to thingiverse if you want a copy. Feedback welcome. I can make adjustments if required.
https://www.thingiverse.com/thing:2897719

 

[Heath-LightsOnTapley]

thanks for that

 

[davenmarcia]

Hi I had a friend print one and it works well. Just wondering about the button extender/pusher he printed 7 to go in each hole but they don't work on the buttons or should it only be 1and use it to poke from the outside?

Dave

 

[AJ240]

Hi I had a friend print one and it works well. Just wondering about the button extender/pusher he printed 7 to go in each hole but they don't work on the buttons or should it only be 1and use it to poke from the outside?

Dave

I think I know what went wrong. I uploaded the wrong version of these buttons. I bet you have the ones without the solid base.
Have a look and see if there is a hole in the base ? If so then fill it and it should work fine. My plan was to glue these to the buttons on the Falcon.
Let me know how you go.

 

[davenmarcia]

I think I know what went wrong. I uploaded the wrong version of these buttons. I bet you have the ones without the solid base.
Have a look and see if there is a hole in the base ? If so then fill it and it should work fine. My plan was to glue these to the buttons on the Falcon.
Let me know how you go.

That's correct i have the ones with a hole. I will fill the holes thanks for a great case.
Dave