AJ240
Up and running for 2019. Kick off Sun 1st 8pm
Thought I would show you what just came off my printer.
Suitable only for the Falcon 16v3 controller.
Suitable only for the Falcon 16v3 controller.


Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I just put this on to thingiverse if you want a copy. Feedback welcome. I can make adjustments if required.would you be able to share the stl? cheers![]()
I think I know what went wrong. I uploaded the wrong version of these buttons. I bet you have the ones without the solid base.Hi I had a friend print one and it works well. Just wondering about the button extender/pusher he printed 7 to go in each hole but they don't work on the buttons or should it only be 1and use it to poke from the outside?
Dave
That's correct i have the ones with a hole. I will fill the holes thanks for a great case.I think I know what went wrong. I uploaded the wrong version of these buttons. I bet you have the ones without the solid base.
Have a look and see if there is a hole in the base ? If so then fill it and it should work fine. My plan was to glue these to the buttons on the Falcon.
Let me know how you go.