da_Start: DMX Start Adress Setter

Adam007

Adam007
Joined
Nov 30, 2012
Messages
43
Location
QLD
Does it error or anything?

I am running it fine on two PC's myself.

Just a thought, have you extracted the program as it is a ZIP file. You need to extract the folder using built in Windows software, or something like WINRAR. Then you can run the program from the extracted folder.
 

Baf05

Full time elf
Joined
Dec 15, 2012
Messages
249
Location
Canberra
I cant get da_start to run no matter what I try, but Steve showed me how to do it threw da_e131, so all sorted :).

I have all my elements made and am ready to build my sequence :)
 

Baf05

Full time elf
Joined
Dec 15, 2012
Messages
249
Location
Canberra
well... I assume I unzipped it.... but cant be sure.... my main computer just wont even open it...

on my laptop I get the error ftd2xx.dll is missing
 

David_AVD

Grandpa Elf
Community project designer
Generous elf
Joined
Jun 12, 2010
Messages
4,681
Location
Victoria Point (Brisbane)
So you double click on the da_Start.exe file but nothing happens at all?

You need to install the FTDI driver to use a USB-DMX dongle. See the wiki page here.
 

Baf05

Full time elf
Joined
Dec 15, 2012
Messages
249
Location
Canberra
that's right nothing happens at all....

I don't need to worry now, as Steve showed me how to do it using da_e131, I am all sorted :)

I also done have a usb dongle.... I use a D4
 

David_AVD

Grandpa Elf
Community project designer
Generous elf
Joined
Jun 12, 2010
Messages
4,681
Location
Victoria Point (Brisbane)
da_Start is not for programming the Ray Wu 3 channel boards. You'd have to use David Moore's program or the Ray Wu hardware programmer.
 
Top