Mega Tree Display Duplicate Faces & Upside Down

danno045

New elf
Joined
Nov 6, 2022
Messages
12
Hi,

Thanks for taking the time to read this. I have a mega tree that is displaying duplicated faces, 3 as you can see from the picture and the middle face is upside down. The output in xlights looks correct, and I have gone over the layout multiple times. I am leaning towards the wiring but I am fairly certain that is correct too. Any help or troubleshooting tips would be much appreciated. I am attaching the layout, sequence, and live image. Let me know if there is other info you might need to help troubleshoot.

Thanks!
 

Attachments

  • IMG_3756.jpeg
    IMG_3756.jpeg
    964.2 KB · Views: 18
  • Elsa Sequence.png
    Elsa Sequence.png
    270.5 KB · Views: 18
  • Layout.png
    Layout.png
    149.7 KB · Views: 18
Starts in the bottom left. 6 strings per strand. 3 strings going up and 3 coming down for each strand. 8 total strands.
 
So there's a discrepancy then with what I'm seeing - the tree has a total of 16 strands there (verticals).
You have it defined as 48 strands (8 strings/connections, with 6 strings per strand) = 8 * 6 = 48.

In Xlights
  • Strings = Controller Connections
  • Strands = Verticals on tree
  • Strands per string = Number of verticals per controller port
  • Nodes Per String = Nodes per port - needs to be divisible by Strands per string.
How you order the lights (50 set, 100 set, etc), means absolutely nothing to the configuration, the joins between them are invisible, when you connect them together, they appear as one string.

So - looking at your tree, it appears to have 150 pixels on each vertical, and 16 verticals for a total of 2400 pixels
Each controller port is doing two strands - it goes up the tree, and back down, so 300 pixels per port.

This would mea that you want to change your "Strands per String" from 6 to 2. Right now it is modelling your tree as 48 verticals of 50 pixels, not 16 x 150.
It explains then why you're seeing the same image 3 times (with the middle flipped) - because on your one physical strand, it's modelling 3x xLights strands.

Summary - Set this in xLights
  • Strings = 8
  • Strands per string = 2
  • Nodes per string = 300
 
Back
Top