Trikky72
New elf
- Joined
- Nov 9, 2012
- Messages
- 20
Now that I have gotten my head around the software side of controlling pixels with Xlights/Falcon Player etc. and most importantly have the ok from the minister of finance since she liked the way the mega tree and small matrix(30x30 pixels) looked.
I thought it would be best to get some input from all the knowledge on here before I go ordering any LED's from Ray Wu, the area that I want to cover with the matrix is 5500mm wide x 1600mm high and facing west so gets the full summer sun in the afternoons.
The options that I have thought of so far are:
1/ pixel strips 5m wide x 20 rows attached to a frame made using 20mm PVC pipe using cable ties
using these pixel strips https://www.aliexpress.com/store/pr...ml?spm=2114.12010612.8148356.8.b4ec2c9cOk9nDO
2/ 100 nodes spread over 5m x 20 rows attached to a frame using 25mm PVC pipe with holes drilled for each node
using these https://www.aliexpress.com/item/18A...pm=a2g0s.13010208.99999999.274.72a13c001yLknO
both of these options would have the PVC pipe strung on vertical runs of 3 stainless steel wire in a similar fashion to this
View: https://www.youtube.com/watch?v=cL9Dy0RlEEw
3/ This option would be either 12mm pixel strips or 12mm Mega Tree strips from BOSCOYO, I would need some sort of frame on the top and bottom to run these vertically, mounting these top and bottom frames could be done using a fastener into the bricks with one at each end and one in the middle, I would use these nodes from Ray
https://www.aliexpress.com/item/BLA...pm=a2g0s.13010208.99999999.259.72a13c001yLknO
Another possible option is the 2" Chromamesh from Boscoyo but I am not sure if these can be joined together or not and I would still need to make some sort of frame and would use these nodes as well https://www.aliexpress.com/item/BLA...pm=a2g0s.13010208.99999999.259.72a13c001yLknO
Below is a picture showing where I want to put this matrix
https://photos.app.goo.gl/ma1WujEPzoU9g7rv8
Any input is greatly appreciated
Cheers
Chris
I thought it would be best to get some input from all the knowledge on here before I go ordering any LED's from Ray Wu, the area that I want to cover with the matrix is 5500mm wide x 1600mm high and facing west so gets the full summer sun in the afternoons.
The options that I have thought of so far are:
1/ pixel strips 5m wide x 20 rows attached to a frame made using 20mm PVC pipe using cable ties
using these pixel strips https://www.aliexpress.com/store/pr...ml?spm=2114.12010612.8148356.8.b4ec2c9cOk9nDO
2/ 100 nodes spread over 5m x 20 rows attached to a frame using 25mm PVC pipe with holes drilled for each node
using these https://www.aliexpress.com/item/18A...pm=a2g0s.13010208.99999999.274.72a13c001yLknO
both of these options would have the PVC pipe strung on vertical runs of 3 stainless steel wire in a similar fashion to this
View: https://www.youtube.com/watch?v=cL9Dy0RlEEw
3/ This option would be either 12mm pixel strips or 12mm Mega Tree strips from BOSCOYO, I would need some sort of frame on the top and bottom to run these vertically, mounting these top and bottom frames could be done using a fastener into the bricks with one at each end and one in the middle, I would use these nodes from Ray
https://www.aliexpress.com/item/BLA...pm=a2g0s.13010208.99999999.259.72a13c001yLknO
Another possible option is the 2" Chromamesh from Boscoyo but I am not sure if these can be joined together or not and I would still need to make some sort of frame and would use these nodes as well https://www.aliexpress.com/item/BLA...pm=a2g0s.13010208.99999999.259.72a13c001yLknO
Below is a picture showing where I want to put this matrix
Any input is greatly appreciated
Cheers
Chris