New T type splitter

[Ɠαяєтн]

I was thinking of using these new splitters with the power injection ones that Ray offers;

http://www.aliexpress.com/store/product/3-core-T-type-waterproof-splitter-the-middle-is-2core-BLACK-color-the-male-connect-s/701799_1707253215.html

I see the injection connectors are the 13.5mm variant with 3 x 0.75mm2 cable. I assume that the 15mm connectors have larger pins and therefore can carry more current. So it might be better to ask Ray if he can make both types of connectors in the larger format.

I am just starting out using these connectors and just wondering what people have had experience with? Which ones are better?

 

[mborg10]

I actually have a bunch of these 3core with 2 core power injection in the middle on order. I put my order thru with a bunch of other custom stuff about a month ago, but I'm not pushing Ray as late last year this is what happened and I got sub par product. So with an agreement between me and Ray he is sorting me out with some replacement stuff. So ill just be patient and wait.


The t spitters will be used for my 100 milky white stars I use on my roof. They come pre wired with the pigtails so this makes it plug and play (kinda) The 100 stars set me back about $800 but they covered my entire roof (small house) and looked great.


I think Ill do pixicles when everyone figures out the easiest way to do them, then I'll jump on board. Or Ill just get Ray to make them.

 

[logandc99]

The t spitters will be used for my 100 milky white stars I use on my roof. They come pre wired with the pigtails so this makes it plug and play (kinda) The 100 stars set me back about $800 but they covered my entire roof (small house) and looked great.

Wow, I was going to order 20 of these for my roof..... now that just doesn't sound like enough now. Do you have a pic or video of how they looked?

I think Ill do pixicles when everyone figures out the easiest way to do them, then I'll jump on board. Or Ill just get Ray to make them.

Sounds like plan

 

[mborg10]

This just just a testing video. Didn't record my entire show last year. Oh and I got ray to make the stars ws2811 dc12v
https://www.youtube.com/watch?v=n9N2MHLHyeE

 

[logandc99]

Very nice effect.
Hmmmm, maybe I will have to order a few more than I thought.

 

[jerrymac]

Why not use 4 core (radially available) and use the 4th (unused on 3 conductor strings) for the DO connection on two of the three ends?

 

[Habbosrus]

Ray has just advised they are now available on his site. Here they are, in black 15mm at least. New splitter I'm waiting for a reply from Ray to find out when they'll be available in white 13.5mm

 

[BundyRoy]

I was thinking of using these new splitters with the power injection ones that Ray offers;

http://www.aliexpress.com/store/product/3-core-T-type-waterproof-splitter-the-middle-is-2core-BLACK-color-the-male-connect-s/701799_1707253215.html

I know this is a little off topic but was looking at the power injection connector above. I thought the +ve had to be separated from the section upstream and only the -ve was common to all power supplies. Have I got something wrong.

 

[mborg10]

I was thinking of using these new splitters with the power injection ones that Ray offers;

http://www.aliexpress.com/store/product/3-core-T-type-waterproof-splitter-the-middle-is-2core-BLACK-color-the-male-connect-s/701799_1707253215.html

I know this is a little off topic but was looking at the power injection connector above. I thought the +ve had to be separated from the section upstream and only the -ve was common to all power supplies. Have I got something wrong.

But if your using the same power supply for power injection and to run your controller, no problems.

 

[Habbosrus]

Ray just got back to me. He will have the 13mm version available in 1 week

 

[Habbosrus]

Well, much sooner than the week mentioned in earlier post. Here is the new 13.5mm version
T type splitter

 

[battle79]

3-2-3 Great for power injection
http://www.aliexpress.com/store/product/3-core-T-type-waterproof-splitter-the-middle-is-2core-BLACK-color-the-male-connect-s/701799_1707253215.html

3-4-3 Perfect for icicles
http://www.aliexpress.com/store/product/3-core-T-type-waterproof-splitter-the-middle-is-4core-female-BLACK-color-the-male-connect/701799_1859056875.html

Three cheers to Ray for making these happen. Can see 20+ of the first one in my order this year.

Regards,
Rowan

 

[mborg10]

Got my t splitters for power injection today. Great time and wiring saver if you purchase pre wired items like the milky stars

 

[logandc99]

I've got some of those stars and t splitters in my order coming from Ray

 

[Habbosrus]

Got my t splitters for power injection today. Great time and wiring saver if you purchase pre wired items like the milky stars

Do these fit Ray's white 13.5mm pigtails? I have 3 core white pigtails (http://www.aliexpress.com/store/product/100-pairs-3-Core-White-Waterproof-Line-15cm-long-each-male-and-female-3core/701799_331631241.html) on my strips and would like to order these for power injection. Before I do, I want to find out if they fit and if the pin out is the same.