Pixel mounting strips

[Merry McSnowballs]

Does any one know where to get the pixel mounting strips in Australia. All the US sites I’ve looked at don’t ship to Aus. Any advice would be greatly appreciated.

Thanks
Ben

 

[darylc]

@TByrne imports from Boscoyo to resell, Boscoyo also ship directly to Australia

 

[Merry McSnowballs]

Thanks darylc.

 

[Matthew Thompson]

There is a group buy for Boscoyo on one other page too to save on freight. I found a place in WA that would make the strips however the cost is cheaper with freight from Boscoyo.

 

[Troy ELD]

Unfortunately the freight is the same with strips. Weight is the issue

 

[Ledmechanic]

Bunnings this is what I use

 

[Ledmechanic]

It’s called strapping brace .8mm thick 25mm wide 30m roll 21.00 you just have to redrill holes to suit 12mm or 9mm it’s available in stainless with 1inch increments the galv stuff is approx 2inch increments

 

[Ledmechanic]

https://www.bunnings.com.au/abey-25-x-0-8mm-x-30m-punched-strapping_p1091923

 

[SantaClaws]

I found these strips at Bunnings.
They are for plaster walls/corners and will hold pixels great.
Just insert at the desired separation.
They're cheap, and come in 3m lengths for about $5.
I used tin-snips to cut them in half lengthwise.