RGB Floods

They were near the electronics/photo lab, but that was at Lake Haven, I will find the name and barcode tomorrow,
They were with the spinning disco ball things, etc if that helps any.
 
<eagerly awaits response!>
Had a quick check and can't find anything named like this, only the hexagon party light but I'm sure that's not it? Was it on clearance?
 
Ok so here are the details:

XUaZCftm.jpg
larger picture here: http://i.imgur.com/XUaZCfth.jpg?1

0XEHbVPm.jpg
larger picture here: http://i.imgur.com/0XEHbVPh.jpg

Hope this helps, it was on clearance from memory, either that or on special, it had a yellow sale ticket on it if that helps..
 
OK so this item was brought in Sept for Christmas only (brought in around 5100 units)
Currently selling for $12 on clearance (Cost $17, original sell $25)
There are around 950 left in stores. If there's enough interest I'll post details.
Sounds like a great find :)
 

Attachments

  • KM disco light SOH 29-12.txt
    7.9 KB · Views: 57
Thanks for the tip off, at $12 a bargain indeed.
Thanks for the list, will have to leave work early and head to the 1 store nearby that still has some.
 
I think there is a network failure near a Kmart store. I had better head off and investigate

Sent from my GT-I9505 using Tapatalk
 
Thanks guys. Visited 4 kmarts, 2 of them had a couple left :)
 
Hmmm, perhaps I should go back to my local kmart, they still had over a dozen of them left.
I could buy em all and sell to you lot at twice the price :D
 
XLR DMX to whatever comes out controller


So has anyone figured out the DMX addressing yet?
There's an A001 to A512 and a d001 to d512
I'm guessing Axxx is for the DMX start address and dxxx is the programming, but why is Axxx listed as 3 channels?
Should the first one be A001 and the next flood A004 (or A002)?


Oh, and how to set them up in xLights?
Do I set this as a 7 or 10 channel DMX device (I'm thinking seven)?


Well, got a year to figure it out, no rush.


PS, might need to get Gil to update the DMX Style in Layout to include DMX Floods, LED Smoke Machines, etc. :D
 

Attachments

  • dmx flood addressing.jpg
    dmx flood addressing.jpg
    76.1 KB · Views: 40
OzAz said:
XLR DMX to whatever comes out controller


So has anyone figured out the DMX addressing yet?
There's an A001 to A512 and a d001 to d512
I'm guessing Axxx is for the DMX start address and dxxx is the programming, but why is Axxx listed as 3 channels?
Should the first one be A001 and the next flood A004 (or A002)?


Oh, and how to set them up in xLights?
Do I set this as a 7 or 10 channel DMX device (I'm thinking seven)?


Well, got a year to figure it out, no rush.


PS, might need to get Gil to update the DMX Style in Layout to include DMX Floods, LED Smoke Machines, etc. :D
I set first one as A001 and second as A002 and they work great.. glad to have found something so useful lol just thought I would try it and see...
 
Thank for this . I went to my local K Mart (Templestowe, VIC) and picked up a couple. Appeared to be the only ones on the shelf, but they called back to say that they had more .

I have another three (from Ray) that I have yet to use - so hopefully these will get used next year.
 
Back
Top