Where does one purchase spare four wire terminals for SAN devices, or other pixel controllers?
E ed26105 New elf Joined Sep 1, 2010 Messages 1 Jun 20, 2015 #1 Where does one purchase spare four wire terminals for SAN devices, or other pixel controllers? Attachments Connector.jpg 5.9 KB · Views: 86
David_AVD Grandpa Elf Community project designer Generous elf Joined Jun 12, 2010 Messages 4,681 Location Victoria Point (Brisbane) Jun 20, 2015 #2 Although different brands of controller seem to use the same connector, there are subtle differences which make them not interchangeable. The best bet is to get some from the original board supplier.
Although different brands of controller seem to use the same connector, there are subtle differences which make them not interchangeable. The best bet is to get some from the original board supplier.
Benslights Dedicated elf Joined May 2, 2010 Messages 2,868 Location Elderslie Jun 20, 2015 #3 could not agree more David as the ones I sell will fit the j1sys controllers but not the sandevices
M mararunr Here to learn! (and share) Joined Dec 31, 2013 Messages 238 Location 3505 NW Edgewood Ave, Bentonville Arkansas, USA Jun 21, 2015 #4 If you use PixLite boards, they use this connector...http://www.digikey.com/product-detail/en/1803594/277-1163-ND/260531
If you use PixLite boards, they use this connector...http://www.digikey.com/product-detail/en/1803594/277-1163-ND/260531