Welding Mega-Tree Topper

[Domestos]

I am hoping somebody in the general area of Brisbane will be able to help me with welding a piece of 300mm pipe to my Tree Topper.

I may also need to have a section of either Square Tube or Lower Thickness Pipe welded to the Top-Side of the Tree Topper for easy Mounting of the Tree Star.

The Tree Topper has a thickness of 6mm and the Pipe is 4.5mm thickness. The Square Tube or Lower Thickness Pipe will most likely be about 2mm thick.

Is anybody able to assist?

 

[Johnnyboy]

I am hoping somebody in the general area of Brisbane will be able to help me with welding a piece of 300mm pipe to my Tree Topper.

I may also need to have a section of either Square Tube or Lower Thickness Pipe welded to the Top-Side of the Tree Topper for easy Mounting of the Tree Star.

The Tree Topper has a thickness of 6mm and the Pipe is 4.5mm thickness. The Square Tube or Lower Thickness Pipe will most likely be about 2mm thick.

Is anybody able to assist?

Don't bother welding, use one of these. I've been using it for a few years and works great. A few bolts and you're done.
It makes a huge difference to weight as you can put the pole up and then lift the topper in place. It's very hard to lift a pole and topper in place in one go.

Ezyrail 234 - Four Fixings Point Square Base Flange

Explore the benefits of Ezyrail 234 - Four Fixings Point Square Base Flange – built for durability and performance.

www.safetyxpress.com.au

 

[Godfree2000]

If your stuck, I would definitely come and weld it up for you

 

[BAZMick]

Same here, we got a welder machine at the factory.

 

[Domestos]

Same here, we got a welder machine at the factory.

Thanks @BAZMick - I'll send you a PM.

 

[tooms]

I've got a very similar topper, I just drilled and bolted 2 short pieces of angle iron to it, then drilled a hole through all of that with the main pipe in place, for the star on top of the topper I drilled a few more holes to bolt another bracket that sits on top