WHERE TO BUY PIXAD and DC15 OUTPUT SCREW TERMINALS?

[talk2coxie]

Hi Guys,

I'm hoping to get some more output terminals to allow easier testing when setting up strings and strips with a PIXAD and DC15 output screw terminals.

The PIXAD has 4 screw terminals and the DC15 has 3 screw terminals (see photos)

https://dl.dropboxusercontent.com/u/43251051/IMAG0008.jpg
https://dl.dropboxusercontent.com/u/43251051/IMAG0009.jpg

I've been to Jaycar but they don't have this type that fit into the boards.

Any help with a link, location or part number will be appreciated.

Thanks in advance,

Coxie

 

[AAH]

I can hook you up with a few of the 3 pin connectors to suit the DC15. There are slight variations in the size of these even though the connectors are 3.5mm.

 

[neilric99]

for the J1sys controllers Ed can send you them, and as will easily go into first class mail its not expensive to ship.

Unless you are very specific about the style and manufacture it is hard to ensure you get a connector that works.

 

[David_AVD]

I have some spare 3 pin ones here, but no 4 pins sorry.

 

[fasteddy]

I wonder if someone has the correct mouser link for these for future reference for others

 

[David_AVD]

The issue is that it's not a Mouser or Digikey part as far as I know. It's from a Chinese manufacturer.