A new home (For 10 months) Storage for your investment

Derf

am now a 5v hypocrite
Joined
Dec 1, 2016
Messages
251
Location
Narellan Vale, NSW
Hi everyone,

I just thought I would share my previous weekends work to find a more permanent less disturbed home for my lighting elements.

I purchased the cheapest shed from bunnings that would accommodate all my display elements with more room for the years of creating i'm prepared to do.
https://www.bunnings.com.au/pinnacle-2-3-x-2-3-x-2-4m-garden-shed-zinc_p3312677

I've anchored it to the pre-existing concrete slab so it doesn't blow away and the end result was quite a sturdy shed.

22ffc49bee250d00d36b1728509de174.jpg

770daa11e36667ebd2b91a937e39ee1b.jpg


I'm currently building shelves for the smaller items and using roof hooks to store the arches as they disassemble quite easily. (This might be the long weekends project) (Australia Day).

Currently I store the following:
  • Roll's of WS2811 Strip
  • Conduit
  • new and used cables
  • amplifier
  • speakers
  • controller boards and enclosures
  • extension cables
Essentially I try keep everything relating to the show in this shed and nothing else (Expect for the blower as there is no room for it in the garage and back shed). so I can pull everything out and it is ready to go.

Some things that I need to improve:
1. As it is a zinc coated shed it absorbs the heat quite a lot making it around 60-80*c inside. So I plan on cutting in a roof exhaust or an indoor to outdoor bathroom fan vent on the rear wall.
2. I would like to run underground power to the shed to either run the fan on a thermostat or just to have a GPO around that back end of the corner without having to run a 20-30m extension cord!

Any suggestions / feedback is appreciated. I would also like to see how you guy's store your items for ideas on how to maximise storage.

Thanks
Derf | Jack
 

OzAz

Senior elf
Global moderator
Joined
Dec 29, 2015
Messages
997
Location
Newcastle
watching with interest
have you considered insulating the shed? would probably need to use "closed cell spray foam" not sure how much this would cost though
 

Ralphyf1

Full time elf
Joined
Jan 11, 2016
Messages
146
Location
2 Brook Court , Kidman Park
Hi Derf,
great idea.
From personnel experience using a small shed, I had trouble with humidity and condensation inside causing all my garden tools to rust very quickly. What I ended up doing for my garden shed was buying a small whirlygig thingy and mounted it in the roof and cut a small panel out quite low down in one wall which I covered with fly-wire Seemed to give enough airflow to solve the problem for my garden stuff. But I am sure someone will have a better idea! cheers Ralphy
 

Derf

am now a 5v hypocrite
Joined
Dec 1, 2016
Messages
251
Location
Narellan Vale, NSW
have you considered insulating the shed? would probably need to use "closed cell spray foam" not sure how much this would cost though

We have a product that I borrowed from work without asking called Foilboard
https://www.bunnings.com.au/foilboard-2440-x-1200-x-20mm-ultra-20-insulation_p0810878

I actually used this to insulate a fish shed for my grandfather but found an exhaust fan do the same thing really. As Ralphy also stated with moisture that having a vent would be a lot better in the long run so I think I will opt for that Idea.

~Derf
 

Fing

Full time elf
Generous elf
Joined
Dec 31, 2014
Messages
405
Location
Muswellbrook
If you can get foilboard at the right price then it would be a good start and costs nothing to run, being a tin shed, the tin heats up and then radiant heat will impact your stuff in the shed, the foil board will stop that radiant heat as it's a barrier.
I would space it off the tin with some battens, say 20mm, to improve its performance as it's not touching the shed and there will be no heat conduction.
A ventilator will help with humidity, but it will only lower the air temp to that of the ambient outside air and does nothing to prevent radiant heat from the walls which is where the heat comes from.

Cheers
Fing
 

Goliath

Full time elf
Joined
Dec 31, 2014
Messages
166
Location
Gracemere
I have a similar pitched roof garden shed. The pitched roof isn't designed very well, and during storms, rain blows up under the ridgecap, and into the shed. Once had a half a bucket full of water sitting under the ridge. That was extreme though - it was after cyclone Marcia.
 

Derf

am now a 5v hypocrite
Joined
Dec 1, 2016
Messages
251
Location
Narellan Vale, NSW
I have a similar pitched roof garden shed. The pitched roof isn't designed very well, and during storms, rain blows up under the ridgecap, and into the shed. Once had a half a bucket full of water sitting under the ridge. That was extreme though - it was after cyclone Marcia.

Thanks for the heads up I think I might put some sikaflex or something similar in the ridge capping

Thanks Derf
 

fxxxrr

New elf
Joined
Aug 31, 2014
Messages
39
i have a 3m x 3m shed and for one reason or another the door never gets shut and in 12 years i have had no issues with humidity etc
luckily the prevaing weather comes from opposite side of shed to my door lol, but even in some pretty serious rain very little if any actually gets in
ive got everything stored in there, car parts camping gear mowers , garden stuff, boxes of clothes, old PC stuff, i did have boxes of books but the ants got into them
 
Top