Derf
am now a 5v hypocrite
Hi everyone,
I just thought I would share my previous weekends work to find a more permanent less disturbed home for my lighting elements.
I purchased the cheapest shed from bunnings that would accommodate all my display elements with more room for the years of creating i'm prepared to do.
https://www.bunnings.com.au/pinnacle-2-3-x-2-3-x-2-4m-garden-shed-zinc_p3312677
I've anchored it to the pre-existing concrete slab so it doesn't blow away and the end result was quite a sturdy shed.
I'm currently building shelves for the smaller items and using roof hooks to store the arches as they disassemble quite easily. (This might be the long weekends project) (Australia Day).
Currently I store the following:
Some things that I need to improve:
1. As it is a zinc coated shed it absorbs the heat quite a lot making it around 60-80*c inside. So I plan on cutting in a roof exhaust or an indoor to outdoor bathroom fan vent on the rear wall.
2. I would like to run underground power to the shed to either run the fan on a thermostat or just to have a GPO around that back end of the corner without having to run a 20-30m extension cord!
Any suggestions / feedback is appreciated. I would also like to see how you guy's store your items for ideas on how to maximise storage.
Thanks
Derf | Jack
I just thought I would share my previous weekends work to find a more permanent less disturbed home for my lighting elements.
I purchased the cheapest shed from bunnings that would accommodate all my display elements with more room for the years of creating i'm prepared to do.
https://www.bunnings.com.au/pinnacle-2-3-x-2-3-x-2-4m-garden-shed-zinc_p3312677
I've anchored it to the pre-existing concrete slab so it doesn't blow away and the end result was quite a sturdy shed.
I'm currently building shelves for the smaller items and using roof hooks to store the arches as they disassemble quite easily. (This might be the long weekends project) (Australia Day).
Currently I store the following:
- Roll's of WS2811 Strip
- Conduit
- new and used cables
- amplifier
- speakers
- controller boards and enclosures
- extension cables
Some things that I need to improve:
1. As it is a zinc coated shed it absorbs the heat quite a lot making it around 60-80*c inside. So I plan on cutting in a roof exhaust or an indoor to outdoor bathroom fan vent on the rear wall.
2. I would like to run underground power to the shed to either run the fan on a thermostat or just to have a GPO around that back end of the corner without having to run a 20-30m extension cord!
Any suggestions / feedback is appreciated. I would also like to see how you guy's store your items for ideas on how to maximise storage.
Thanks
Derf | Jack