ABS enclosure power connection

[goopy]

Hi all,

What is considered best practice for providing power to the junction / project box? I am having trouble finding a waterproof (IP44?) socket that would be suitable. Do others just run a power lead out of the box?

Cheers,

Chris

 

[David_AVD]

A lot of people use cable glands for DC cabling. I've done the same for an incoming mains cable, but that was a fixed tail.

If this is for mains, make sure you use something that is rated for 240V operation and 10A.

Caravan inlets may suit, but they tend to be a bit on the bulky side.

 

[Elecgreg]

The caravan inlet style only come in 15 amp version there is an industrial 56 series if memory serves but the are both pricey $50 mark

 

[Elecgreg]

Caravan 10 Amp Power Outlet for Motor Home and RV 240V Electrical Socket Camping | eBay

W: 80mm H: 103mm D: 60mm (overall) D: 45mm (mounting). 10 Amp Power Outlet 240V. 4 Gang Slimline Light Switch Electrical Wall Narrow Switch Board 118 mm x 72mm. Dual USB Port Double 3 Pin Electrical Power Point Socket Outlet GPO Slim Wafer.

www.ebay.com.au

1 option on ebay

 

[Katekate]

I use powercon connectors, but I wouldn't call them waterproof.

 

[TANSA]

Please use a licensed electrician to do any mains work.

Shop Iso | ISOAI310PG | APPLIANCE INLET 3 FLAT PINS 10A 250V GREY | Inlets | Ideal Electrical Supplies

Weve got APPLIANCE INLET 3 FLAT PINS 10A 250V GREY at wholesale prices at Wholesale Electrical Supplies l Ideal Electrical - Register Now!

www.idealelectrical.com

 

[bpratt]

As it has been said, use a licenced electrician for all of your mains powered stuff.

That said, people often use an extension cord with the tail cut off and inserted in to the controller box through a gland, and then to your meanwell psu's.

 

[goopy]

Thanks all, I think I will go with the inlet plug and then get it checked by an A Grade before connecting to mains / powerimg on.