perigalacticon
New elf
I am testing an ESPixelStick with xLights and FPP. There are holds and jumps during the display (just one string of 50 leds). Can you help me set up the networking definitions for the devices to get a clean show?
I'm using my home Xfinity/Comcast internet network router. I made a separate network for show data. For instance the router gateway is 10.0.0.1. I made 10.0.2.0 the subnet network for the show. I tried variations on the netmasks as well. Below are my current settings. What should I do for good results with ESPixelSticks?
I'm using my home Xfinity/Comcast internet network router. I made a separate network for show data. For instance the router gateway is 10.0.0.1. I made 10.0.2.0 the subnet network for the show. I tried variations on the netmasks as well. Below are my current settings. What should I do for good results with ESPixelSticks?
FPP1 | Falcon Pi Player on Pi Zero #1 | ||||
IP Static: | 10.0.2.1 | Connected by WIFI only | |||
Netmask: | 255.255.0.0 | ||||
Gateway: | 10.0.0.1 | ||||
Router | Win10 PC | ||||
Gateway: | 10.0.0.1 | IP Static: | 10.0.0.10 | ||
Netmask: | 255.255.0.0 | ||||
Gateway: | 10.0.0.1 | ||||
ESPS1 | ESPixelStick #1 | ||||
IP Static: | 10.0.2.2 | ||||
Netmask: | 255.255.0.0 | ||||
Gateway: | 10.0.0.1 | ||||
Android Phone | |||||
IP Static: | 10.0.0.20 | ||||
Netmask: | ?? Not Shown | ||||
Gateway: | 10.0.0.1 | ||||
Android Tablet | |||||
IP Static: | 10.0.0.30 | ||||
Netmask: | ?? Not Shown | ||||
Gateway: | ?? Not Shown |