AusChristmasLighting
Wiki

Falcon F16v3 Printable version

https://auschristmaslighting.com/wiki/Falcon-F16v3

This page has been seen 11,019 times.

F16v3
The Falcon F16v3 is available from the Pixel Controller, LLC:
Most information on the Falcon F16v3 controller is at http://falconchristmas.com/forum/index.php?board=62.0

The Falcon F16v3 is no longer available. It has been replaced by the Falcon F16v4.
The article remains for information and support of existing Falcon F16v3 owners.


Specifications

  • 16 pixel outputs, fused
    • 1024 pixels per output (expandable to 32/48 outputs with up to two optional F16v3 expansion boards).
    • Supports: WS2801, WS2803, WS2811, WS2812, TM180x, TM1812, SM16715, INK1003, TLS3001, TLS3002, CY3005, LPD6803, D705, LPD1101, USC6909, UCS6912, APA102, LX1203
  • 5V-13V DC with input reverse-polarity protection
  • 3 DMX outputs
  • 2-port Ethernet switch (allows daisy chaining).
  • OLED screen
  • USB for sound
  • Headers for case fans and future sound board
  • SD reader for firmware upgrades and *.FSEQ fules
  • Real-time clock
  • No daughter board

Expansion Boards

Local expansion

F16v3 local expansion
16 additional local fused outputs per expansion. Up to two expansions are supported (32 additional local outputs, 48 total outputs).
NOTE: F16v3 (white) expansions must be used when using two off the same F16v3 controller. F16v2 (red) expansion or F16v3 (white) expansion will work when using just one expansion.

F16v3 local expansion:

Differential expansion

F16v3 differential expansion
Up to 2 may be used per controller.
  • 4 remote outputs (each output supports 4 pixel outputs on a differential receiver board)
  • 75 metres max distance between differential expansion and differential receiver boards
F16v3 differential expansion:
F16v3 differential receiver
F16v3 differential receiver:

Useful videos