There are multiple kinds of Computer-control software available. Some sequencing titles are free while others are not. The most notable sequencing software consist of Vixen, LightShow Pro and Light-O-Rama Showtime Suite, however there are others out there.
Light-O-Rama's Showtime Suite and Animated Lighting's Animation Director mostly support their own proprietary controllers only whereas other sequencers (xLights, Vixen, LightShow Pro) provide options for a wider-range of protocols including the DIY-focused Renard. The comparison table shows the different protocols that each sequencer supports.
A simple test utility for testing E1.31 hardware is called da_E131. This can be useful for tracking down whether a problem is hardware or software related.
David Duffy of da-Share has developed several test programs for testing lighting controllers.
Single or multiple universes can be selected. Individual channels, white, R, G or B can selected or chases can be done.
xLights has built in testing features as well. The latest version of xlights incorporating nutcracker effects builder can be found at https://xlights.org/resources/
Planet Christmas have incorporated Several software providers into the signature generator that is compatible with this Forum.
You can generate your own here:
http://planetchristmas.com/signatures/
AusChristmasLighting also has a smaller "slimline" signature builder from http://auschristmaslighting.com/signatures/
Sequencers
Cost Comparison
| Software Name | Licence Type | Cost ($US) |
|---|---|---|
| xLights (site) | Freeware | $0 |
| Vixen (site) | Freeware | $0 |
| Light-O-Rama Software Suite (site) | Standard (8 controllers/128 channels no dmx/e1.31, 5 computer) | $99.95 |
| Advanced (Unlimited controllers with dmx/e1.31, 5 computer) | $139.95 | |
| Professional (Unlimited controllers with dmx/e1.31, Pixel Editor, 5 computer) | $189.95 | |
| LightShow Pro | Basic (1 universes, 2 computer - up to 5 on request) | $99.00 |
| Advanced (16 universes, 2 computer - up to 5 on request) | $249.00 | |
| Professional (64 universes, 2 computer - up to 5 on request) | $399.00 | |
| Ultimate (586 universes, 2 computer - up to 5 on request) | $POA | |
| Animated Lighting Animation Director (site) | Commercial | $399.95 |
| Light Factory (site) | 1 Universe Pro (1 universe, commercial use permitted) | $499.00 |
| HLS (site) | Freeware | $0 |
| PixelController (site) | OpenSource | $0 |
Protocol Support Comparison
Light-O-Rama's Showtime Suite and Animated Lighting's Animation Director mostly support their own proprietary controllers only whereas other sequencers (xLights, Vixen, LightShow Pro) provide options for a wider-range of protocols including the DIY-focused Renard. The comparison table shows the different protocols that each sequencer supports.
| Software Name | Version | E1.31 (sACN) | Art-Net | DMX512 (E1.11) | Light-O-Rama | Animated Lighting | Renard | Olsen 595 | X-10 | Misc |
|---|---|---|---|---|---|---|---|---|---|---|
| xLights | 3x, 4x | |||||||||
| Vixen | 2.x | via addon^ | ? | via addon* | ||||||
| 3.x | ? | |||||||||
| Light-O-Rama Software Suite | S2 | via converter** | ||||||||
| S3, S4 | Yes (with advanced licence)*** | Yes (with advanced licence) | ||||||||
| LightShow Pro | 1.x | ? | ||||||||
| 2.x | ? | |||||||||
| Animated Lighting Animation Director | - | ? | Yes**** | |||||||
| Aurora | 1.x | ? | Yes***** | |||||||
| Madrix | 3.x | via DMX | ? | ? | ? | ? | ||||
| HLS | 6x | ? | ? | ? | ? | ? | ? | |||
| FPP (Falcon Player) | 0.3x | via DMX | ||||||||
| PixelController | 1.x | ? | UDP, Rainbowduino, MiniDMX, PixelInvaders |
- * LOR Controller support possible with either a supported DMX dongle and DMX-to-RJ45 adapter or a 3rd-party LOR1 plug-in
- ** DMX Lighting requires the advanced version of S3/S4 ''OR'' an additional Light-O-Rama component (iDMX1000)
- *** E1.31 Equipment requres the advanced or professional version of S3/S4, 3.5.0 or higher.
- **** DMX Lighting requires an additional Animated Lighting component
- ***** DMX Lighting requires an additional Aurora component
- ^ E1.31 support via optional plug-in
E1.31
E1.31 is a relatively new way of transmitting DMX signals directly over Ethernet, instead of using traditional USB dongles and XLR cabling.A simple test utility for testing E1.31 hardware is called da_E131. This can be useful for tracking down whether a problem is hardware or software related.
Utilities
Utilities may assist with achieving certain effects but do not drive a light show directly. Utilities output some kind of file that may be opened in a sequencer.Falcon Player
The Falcon Player (FPP), previously known as the Falcon Pi Player, does playback of your sequences without a connected PC. You can use Nutcracker to convert from various sequencing software to FPP format or some software supports direct export to FP like Vixen 3. If your show is lagging this is a good option.- http://falconchristmas.com/wiki/index.php/Falcon_FPP (Original Wiki Site)
- Read more: Falcon Player wiki page
Nutcracker
Nutcracker is a free tool that will allow the easy creation of animations for RGB devices. Developed by Sean Meighan and added to xlights by Matt Brown in December 2012.Light-O-Rama SuperStar
LED DMX Module Address Programmer
Scott (SBDJ) from the AusChristmasLighting forum wrote and released an application for setting the start address of the simple 3 channel dmx modules available from holidaycoro, Ray Wu and ebay among the numerous sources. It requires an open dmx FTDI usb dongle and the application can be downloaded from http://www.sbdj.co.uk/dmxmodule/ or https://auschristmaslighting.com/wiki/File:DMXModuleAddress-zip
Test Software
David Duffy of da-Share has developed several test programs for testing lighting controllers.
E1.31
A simple test utility for testing E1.31 hardware is called da_E131. This can be useful for tracking down whether a problem is hardware or software related.Single or multiple universes can be selected. Individual channels, white, R, G or B can selected or chases can be done.
DMX
A simple test utility for testing dmx hardware controlled via open dmx or dmx pro usb dongles is called da_DMX. This can be useful for tracking down whether a problem is hardware or software related. After the software is run select "Open Port" to connect to the dongle.xLights has built in testing features as well. The latest version of xlights incorporating nutcracker effects builder can be found at https://xlights.org/resources/
Forum Signature Generator
Planet Christmas have incorporated Several software providers into the signature generator that is compatible with this Forum.
You can generate your own here:
http://planetchristmas.com/signatures/
AusChristmasLighting also has a smaller "slimline" signature builder from http://auschristmaslighting.com/signatures/
Related
Categories:
Contents