aimbrunone
Apprentice elf
- Joined
- Jan 19, 2024
- Messages
- 81
I’m using the 36v Meanwell to better power the amp I’m using. This amp has a bit more power and the recommended volts was, I believe, 24v-50v.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This is the timer relay I used https://www.amazon.com/JESSINIE-Tri...delay+timer+control+off+switch,aps,367&sr=8-3Thanks for your patience!!
Ok. I’m going to get the buck converter and drop down to 12 or even 24. Found this item. https://a.co/d/027SHjCc
I also found this DPDT solid state relay. https://a.co/d/0e0FsZyd
I can override the push button by using this SPDT switch. https://a.co/d/0d8YAFWP
This is the push button relay I found for 36 v. https://a.co/d/0hgDYgcT
Will these products work as you described in your diagram?

Finally received the dpdt yesterday! Terminals look a bit different from the diagram you posted. Would you be able to help? Here is a pic of the dpdt.Found it! Sure called Latest Buy!
Yes!!!! We are up and running correctly! Now, just need to put it all in a box! lol. Thanks so much!hope this helps
Hi there! You helped me a few months back with my audio push button box. I'm in need of your help again if you are willing! Things were working for a while then stopped. Couldn't get the push button working, had issues with the relay and can't even remember what else. I did a few modifications to the most current diagram you sent me. I now have two power supplies. 1 36V that only powers the amp. I eliminated the step down and am using a second power supply (12V) to power everything else. I replaced my push button with a new one, replaced the time delay relay with a new one and replaced the DPDT that I use turn the speaker wires on and off. All was good a few weeks ago! Working great! Went out there just now to give it a final test before Thanksgiving and not working properly. I believe the problem is in the Single Pole Double Throw switch that I use to either use the push button or to keep constant sound on. I think at this point, I want to eliminate that switch all together and only use the system as the push button. (The issues the switch is having, is sometimes power does not get to the relay, sometimes it does. Sometimes the relay triggers itself without pushing the button.). The on switch has still consistently worked.hope this helps