Re: v2.6 code released for ECG-P2, ECG-PIXAD8, ECG-P12R
Well i went back to 2.5 and all connected up fine, then went back to 2.6 and no go again
Well i went back to 2.5 and all connected up fine, then went back to 2.6 and no go again
burner said:Thanks for the update Ed. Not sure if I can be of more assistance, but from my testing, as soon as I turn on the J1SYS-P12R, the lights don't come on, but after the bootloader finishes they start flickering random colours on their own. Data seems to be leaving the unit without being requested/programed to.
The twinkling I am seeing seems to be very washed out colours, if that's any help Ed.crispy said:burner said:Thanks for the update Ed. Not sure if I can be of more assistance, but from my testing, as soon as I turn on the J1SYS-P12R, the lights don't come on, but after the bootloader finishes they start flickering random colours on their own. Data seems to be leaving the unit without being requested/programed to.
This. My lights just twinkle random patterns when they should be off. That being said a slow random twinkling mode would be a nice function to have.
burner said:Thanks for the update Ed, that has worked on my P12R
Just tested 2 of my sequences, and they all play through fine, and there is no flickering issues here.