PixLite 16 MKII

The PixLite 16 MKII is a high capacity 16 channel pixel controller.

PixLite 16 MKII

Status
Released
Yes
Product Version
1.1
Soldering Required
No


Features

PixLite 16 - Assembled PCB

Data
  • Ethernet input compatible with industry standard sACN (E1.31) and Art-net DMX-over-ethernet protocols
  • Onboard E1.31 to DMX512 output capability (no Art-Net to DMX)
  • Supports both Multicast and Unicast addressing
  • Supports IGMP allowing highly efficient data packet routing in large Multicast networks with many hundreds of universes
  • High refresh rates
Power
  • Individually fused outputs and logic circuitry
  • Wide range voltage input
  • High current capacity outputs
  • Configuration free power connection
Other
  • High power TVS (600W transient peak) providing external ESD protection on DMX interface
  • Remote temperature and voltage bank monitoring
  • Firmware upgradable remotely over the ethernet network via the easy-to-use ‘Advatek Assistant’ utility
  • Simple network setup and fast configuration via powerful Assistant utility that shows all controllers on the network at once
  • Advanced configuration options including start universe, start channel, null pixels, zig-zag, reverse pixels, RGB *color order, pixel grouping, brightness control and more
  • Built-in hardware test pattern modes
  • Individual outputs with each connector supplying power and data over a single cable
  • Easy to use pluggable screw terminal connectors on all channel outputs and data interfaces
  • Currently supports PixLite Bright™ series (12-bit) and PixLite Pro™ series (16-bit) pixel strings in addition to numerous other pixel protocols (TLS3001, SM16716, LPD6803, WS2801, WS2811/12/12B/APA104, TM180x, MBI6020, INK1003, APA102. Note: one pixel type at a time per controller.)
  • Features 4 standard DMX512 universe outputs (providing an E1.31 to 4 x DMX bridge, no Art-Net to DMX) via dedicated RJ45 connectors, in addition to the 32 universes of pixel output.
  • Two split power banks allowing simultaneous support of two different pixel voltages (rated at 32A each for total current capacity of 64A)
  • 16 individual outputs with each output protected by 4A mini blade fuse (can be changed up to 7.5A)
  • Jumper links allowing selection between “LOR” and “ESTA” wiring on DMX outputs
  • Receives up to 96 universes of Art-net data and up to 100 universes of E1.31 data
  • Auxiliary output allows PWM control of an external fan for automatic temperature regulation inside an enclosure
  • 6 layer PCB with high copper density to handle large currents and minimize voltage drop
  • Total output capacity of 16,320 pixels (max 1020 per output)
  • Available as a “Plug and Play” control system (Standard 320W) in a durable, weatherproof polycarbonate enclosure – ideal for commercial and professional installations

Form Factor

The controller comes as a "DIY" (assembled PCB only) or "Plug & Play". In addition to the assembled PCB board, the P&P version comes with the following preinstalled:
  • A RSP-320 320W Meanwell power supply
  • Panel connections for lights and data and a 3m long AC cable
  • A weatherproof vented, UV resistant enclosure.
Plug and play version

This page has been seen 4,389 times.

Recent wiki activity

Icon legend

  • Normal page
  • Color code

    • Content has new updates
    • Content has no updates
Back
Top