The PixLite 4 is a high capacity 4 channel pixel controller.
PixLite 4
Status
- Released
- Yes
- Product Version
- 1.2
- Soldering Required
- No
The PixLite 4 is no longer available. It has been replaced by the PixLite 4 MkII-ECO.
The article remains for information and support of existing PixLite 4 owners.
The article remains for information and support of existing PixLite 4 owners.
Features
Data
- Ethernet input compatible with industry standard sACN (E1.31) and Art-net DMX-over-ethernet protocols
- Onboard E1.31 to DMX512 output capability (no Art-Net to DMX)
- Supports both Multicast and Unicast addressing
- Supports IGMP allowing highly efficient data packet routing in large Multicast networks with many hundreds of universes
- High refresh rates
Power
- Individually fused outputs and logic circuitry
- Wide range voltage input
- High current capacity outputs
- Configuration free power connection
Other
- High power TVS (600W transient peak) providing external ESD protection on DMX interface
- Remote temperature and voltage bank monitoring
- Firmware upgradable remotely over the ethernet network via the easy-to-use ‘Advatek Assistant’ utility
- Simple network setup and fast configuration via powerful Assistant utility that shows all controllers on the network at once
- Advanced configuration options including start universe, start channel, null pixels, zig-zag, reverse pixels, RGB *color order, pixel grouping, brightness control and more
- Built-in hardware test pattern modes
- Individual outputs with each connector supplying power and data over a single cable
- Easy to use pluggable screw terminal connectors on all channel outputs and data interfaces
- Currently supports PixLite Bright™ series (12-bit) and PixLite Pro™ series (16-bit) pixel strings in addition to numerous other pixel protocols (TLS3001, SM16716, LPD6803, WS2801, WS2811/12/12B/APA104, TM180x, MBI6020, INK1003, APA102. Note: one pixel type at a time per controller.)
- Features 1 standard DMX512 universe output (acting as a single E1.31 to DMX bridge) via a dedicated screw terminal connector, in addition to the 16 universes of pixel output
- Single power input rated at 32A
- 4 individual outputs with each output protected by 5A mini blade fuse (can be changed up to 7.5A)
- Receives up to 16 universes of Artnet data and up to 17 universes of E1.31 data
- 4 layer PCB with high copper density
- Total output capacity of 2,720 pixels (max 680 per output)
Form Factor
More Info/Vendor Link
Categories:
Advatek Lighting pages
List of E1.31 controllers
This page has been seen 2,879 times.
-
-
Created by onLast updated by on
-
- Contributors: