The Aurora Core is an E1.31 pixel controller sold by Light-O-Rama. Unlike several other pixel controllers, Aurora Core does not support pixel IC types that require a clock wire.
Specifications
- 16 pixel outputs, fused
- 1000 pixels per output maximum
- Supports: WS281x
- 5V-12V DC
- 10,000 pixel limit
- 2 DMX outputs (1 universe each)
- OLED screen
Differences from PixCon16
| PixCon16 | Aurora Core | |
|---|---|---|
| Power indicator LED for each bank | ||
| Maximum pixels per port | ||
| Optional clock wire on pixel outputs | ||
| Maximum universes supported | 36 | 58 |
| DMX outputs | 4 | 2 |
| Onboard OLED screen | ||
| ELOR Mode | ||
| Long range receiver support | ||
| Controller configuration method | Software utility | Web interface |
| Automatic pixel counting | ||
| Per port current monitoring | ||
| Wi-Fi hotspot for testing | ||
| Per port substring setting | ||
| Built-in test mode effects |
Manual
| Light-O-Rama (website)
| |
|---|---|
| Software | Light-O-Rama Software Suite
|
| AC Controllers | CTB16PC · CTB32LD · CTB16D · CTB08D
|
| DC Controllers | CMB16D · CMB16D-QC · CMB24D
|
| Adapters & Protocol Bridges | SC485 · USB-RS485 · iDMX-1000
|
| Pixel Controllers | E1.31: PixCon 16 · DMX: Pixie 4 · LOR only: Pixie 8, Pixie 16
|
| Cosmic Color Devices | Cosmic Color Ribbon (CR150D) · Cosmic Color Bulbs (CB50D) · Cosmic Color Ribbon II (CCR-II) |
Categories:
List of E1.31 controllers
List of LOR controllers
This page has been seen 325 times.
-
-
Created by onLast updated by on
-